Air Spray Gun Paint Sprayer Suction Feed Pneumatic Sprayer Tool For Car Repair 86094492

Note:Only paint and glue can be sprayed

Specification:

Material: Aluminum alloy

Nozzle caliber: 1.8mm

Spraying distance: 200-250mm

Sprinkler capacity: 1000ml

Coatings supply mode: suction type

Feeding method: suction type

Intake connector: G1/4

Product size: 18*11*30cm

Product weight: 1kg

Maintenance:

Before using the spray for the first time, you need to clean the residue in the paint channel and add the thinner to the gun. Try to filter the inside of the spray gun to ensure clean. Adjust the appropriate spray pressure when spraying.

At the end of each day, clean the spray gun with water. The cleaning method is as follows: Let the water of the sky or the water of the washing machine be sprayed out of the gun body like a spray paint. Repeat the operation. After the cleaning is completed, close the paint, blow the spray gun with air, and hang it to dry. Every other week, you need to disassemble the needle tip, atomize the cap, soak it in the water, wash it, wipe it dry, apply a little pneumatic oil, and then put it into the spray gun. Note that the nozzle mouth is wrapped with white sealing tape to ensure the sealing of the spray gun. . If the paint has a high viscosity, it can be done once or two or three times. If the gun is well maintained, it will increase its life and maximize its value.

Included:

1x Paint coating pneumatic watering can